SPEDIX IS20

The SPEDIX IS20 is a great little 4 in 1 ESC capable of providing 20A continuously and 25A burst.

It weighs 4.9g including the cables.

BLHELI is a firmware for ESC's. BLHELI_32 is the newer and improved version (generation 3 of the BLHELI firmware - after BLHELI and BLHELI_S) utilizing 32 bit processors on the ESC. The main job of ESC firmware is to control the speed of your motor and thus the timing for switching the motors phases. In this article we will discuss major differences between the new BLHELI_32 and the predecessor BLHELI_S.

ESC's have two specifications related to current, the continuous current and the burst or peak current. The continuous current, as the name suggests, is the current that you can safely draw for a long / continuous amount of time.

Hakrc 15A Blheli_S BB2

The Hakrc 15A Blheli_S BB2 4 in 1 ESC is the right choice for every micro quad that does not need insane amounts of power. With its 15A continuous current it might be the right choice for your 2".

Comes with mounting hardware and connection wire.

HGLRC 40A BLheli_32

Even for the most power hungry mini or micro quad the HGLRC 40A BLheli_32 4 in 1 ESC - with its 40A continuous current supply - is the right choice. Since it has a pin header it is best used in combination with the matching Flightcontroller.

LDARC Flytower 12A

The LDARC / Kingkong KK Flytower 4 in 1 ESC comes with all the needed accessories and provides continous 12A and a burst of 15A. The solder tabs are pretty chunky and easy to solder to. Is has a pin header to be easily connected to the proper flight controller in the Flytower stack.

Very light weight ESC.

Spare part for the LDARC Flytower. Does not come with cable.

LDARC Flytower 20A

The LDARC / Kingkong KK Flytower 4 in 1 ESC comes with all the needed accessories and provides continous 20A and a burst of 25A. The solder tabs are pretty chunky and easy to solder to. Is has a pin header to be easily connected to the proper flight controller in the Flytower stack.

Very light weight ESC.

Spare part for the LDARC Flytower. Does not come with cable.

Hobbywing XRotor Nano

The Hobbzwing XRotor Nano 4 in 1 ESC comes with all the needed accessories and provides continous 20A and a burst of 30A. The solder tabs are pretty chunky and easy to solder to.

A very solid choice for your micro quad build.

HGLRC D20A

The HGLRC D20A 4 in 1 ESC comes with all the needed accessories and provides continous 20A and a burst of 25A. The solder tabs are pretty chunky and easy to solder to.

A very solid choice for your micro quad build.

Airbot Wave 4 in 1 2020 BB21

The Airbot Wave 4 in 1 2020 BB21 ESC is capabale of provideing 10A continuous current per channel. The board is very small and the solder pads too - only recommended for people with advances soldering skills.

Does not come with wires, so don't forget to order those seperately.